Due to the COVID-19 Pandemic, orders may have significant delays.

Excavation

Applications

The word "excavation" covers a wide range of operations such as; trenches, basements, carparks, footings, swimming pools. The scale varies from multi-storey building sites to single residence dwellings.

The material to be excavated varies widely with location - from soil to very hard rock.

Why use a rocksaw?

  • rocksaws have very low vibration levels. This has several advantages over hammering
  • lower noise levels on site and surroundings
  • does not cause cracking to existing property
  • does not fracture the rock around
  • saw cuts prevent vibrations travelling through solid rock
  • Rocksaws can be used for removing hard rock where hammers are ineffective. The rocksaw cuts slots in the rock, and the hammer is used to break the cut rock away. The number of cuts required depends on the how easily the rock can be broken.
  • In softer rock, they are often used for boundary cutting, providing a smooth regular wall.
  • to minimise concrete, rocksaws can be used to cut the boundaries of footings and pads
  • For cable trenches in soft rock such as sandstone and limestone, tungsten-carbide saws can be very successful by producing a cut wide enough for the cable to be laid with a single cut. In hard rock, twin-blade diamond rocksaws can cut two parallel slots in the rock at the required distance apart, and then the material must be broken off and removed.
  • From some building sites, it is possible to remove blocks of stone, and reuse them as dimensional stone on the site, or elsewhere. This converts waste material which is expensive to dispose of, to a valuable building material.

Under houses,  and other confined spaces

Access to backyards and underhouse spaces can be limited to less than 1m, which means that only mini excavators can be used. Mini excavators can often lack the power to effectively hammer through hard rock or concretehammering can cause damage through vibration to existing structures.

Excavator rocksaws provide a solution. With a mini excavator or robot, the rock can be cut and then more easily broken and removed.

The finished wall is smooth and can even be used to feature the grain of the rock. The rock can be reused for site works in the form of landscaping material - for example retaining walls and stairways.

Diamond rocksaws on mini-excavators can be used for cutting reinforced concrete for demolition within buildings, or swimming pool

Diamond rocksaws
Tungsten-carbide rocksaws
OmniCut Rocksaws